// 2D projection for paper test fit - OFFSET VERSION
// Print this at 100% scale (no scaling)

include <BOSL2/std.scad>

// Asymmetric plate dimensions
plate_left = 63.5;          // mm (2.5 inches)
plate_right = 114.3;        // mm (4.5 inches)
plate_width = 177.8;        // mm (7 inches total)
plate_x_offset = 25.4;      // mm (1 inch) - plate center offset
plate_height = 230.0;
plate_corner_radius = 3.0;

opening_width = 34.0;
opening_height = 67.0;
opening_corner_radius = 2.0;

// Main screw holes (pill-shaped)
screw_hole_height = 6.0;
screw_hole_width = 14.0;
screw_hole_spacing = 83.3;

// Outer screw holes (circular)
outer_screw_hole_offset = 6.35;
outer_screw_hole_diameter = 2.68;

$fn = 64;

difference() {
    // Plate body (offset in X)
    translate([plate_x_offset, 0])
        rect([plate_width, plate_height], rounding=plate_corner_radius);
    
    // Opening (at origin)
    rect([opening_width, opening_height], rounding=opening_corner_radius);
    
    // Main screw holes (pill-shaped, at origin)
    translate([0, screw_hole_spacing/2])
        rect([screw_hole_width, screw_hole_height], rounding=screw_hole_height/2);
    translate([0, -screw_hole_spacing/2])
        rect([screw_hole_width, screw_hole_height], rounding=screw_hole_height/2);
    
    // Outer screw holes (circular, at origin)
    translate([0, screw_hole_spacing/2 + outer_screw_hole_offset])
        circle(d=outer_screw_hole_diameter);
    translate([0, -screw_hole_spacing/2 - outer_screw_hole_offset])
        circle(d=outer_screw_hole_diameter);
}